APPLE LASERWRITER SELECT 360 PRINTER DRIVER FOR WINDOWS

APPLE LASERWRITER SELECT 360 PRINTER DRIVER DETAILS:

Type: Driver
File Name: apple_laserwriter_42808.zip
File Size: 24.2 MB
Rating:
3.6
49 (3.6)
Downloads: 35
Supported systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows 2008, Windows Vista
Price: Free* (*Free Registration Required)

Download Now
APPLE LASERWRITER SELECT 360 PRINTER DRIVER



List of Apple printers

Replacement Note: Make sure that the two cassette gears mesh properly with the gear train. Cassette Feeder Board Connector P Cassette Feed Solenoid Remove the screw and lift out the cassette pickup solenoid. Using your fingers, press down on the apple laserwriter select 360 printer pickup rollers and release them from the roller shaft. Lift out the cassette pickup rollers.

Cassette Pickup Rollers E-Ring Slide the bushing on the right side of the shaft out of its slot. Replacement Note: Install the bushings in the slots at Pickup Roller Shaft each end of the cassette feeder assembly.

Slide the bushing on the right side of the shaft out of its slot. Replacement Note: Install the bushings in the slots at each end of the cassette feeder assembly.

LaserWriter Select 360:Technical Specifications

Cassette Feeder Roller Lift out the fuser assembly. Replacement Note: Make sure that connector J on the fuser assembly makes proper contact with the connector receptacle on the printer chassis. Fuser Top Cover Spring Lift up the left and right nip levers. Fuser Paper Guide Page Take Apart Delivery Sensor Lever - 44 Lift the delivery sensor lever straight apple laserwriter select 360 printer, twist it slightly to the left or right, and remove it from the fuser assembly.

Printer: Apple LaserWriter Select OpenPrinting - The Linux Foundation

Delivery Sensor Lever Page Take Apart Fuser Heater Bulb - 48 Remove the three screws that secure the right fuser side cap to the fuser assembly. Note: In apple laserwriter select 360 printer next step, the gear and gear shaft may fall off. Keep these parts in a safe place. When that refill runs empty, refill it one more time. They are both exactly the same.

APPLE LASERWRITER SELECT 360 PRINTER DRIVERS FOR WINDOWS

Only defference is that on one board, under the mf capacitor, Y2, Y1 are present and DL1 is absent on other board, under the mf capacitor, Y1, Apple laserwriter select 360 printer are present and Y2 is absent which one is which here" on the parallel port.

Note that printer can also handle PCL.

Relevant Posts